How to Install an SSL Certificate on a FileZilla server

Reference: https://www.thesslstore.com/knowledgebase/ssl-install/how-to-install-an-ssl-certificate-on-a-filezilla-server/

How to Install an SSL Certificate on a FileZilla server

The following instructions will guide you through the SSL installation process on a FileZilla server. If you have more than one server or device, you will need to install the certificate on each server or device you need to secure. If you still have not generated your certificate and completed the validation process, reference our CSR Generation Instructions and disregard the steps below.

What You’ll Need

1. Your server certificate

This is the certificate you received from the CA for your domain. You may have been sent this via email. If not, you can download it by visiting your Account Dashboard and clicking on your order.

2. Your intermediate certificates

These files allow the devices connecting to your server to identify the issuing CA. There may be more than one of these certificates. If you got your certificate in a ZIP folder, it should also contain the Intermediate certificates, which is sometimes referred to as a CA Bundle. If not, download the appropriate CA Bundle for your certificate.

3. Your private key

This file should be on your server, or in your possession if you generated your CSR from a free generator tool. On certain platforms, such as Microsoft IIS, the private key is not immediately visible to you but the server is keeping track of it

Installation Instructions

1. Open FileZilla Server Options and select Edit, then Settings.

FileZilla Server Options

2. This will open a FileZilla server options window, select SSL/TLS Settings on the left.

SSL/TLS Settings

3. On the right, select Enable FTP over SSL/TLS Support.

4. Select the Private Key file, locate your private key.

5. Enter the Private Key password (if necessary)

6. Click on OK, restart the server.

Congratulations! You’ve successfully installed your SSL certificate! To check your work, visit the website in your browser at https://yourdomain.tld and view the certificate/site information to see if HTTPS/SSL is working properly. Remember, you may need to restart your server for changes to take effect.